The AW-UB50 and AW-UB10 are box-style cameras with large sensors housed in a compact body, offering excellent resolution and expression capabilities.
They adopt a common IP control protocol that enables seamless integration with our remote camera systems for efficient operation.
Compact, lightweight
Interchangeable lens type
Remote camera integration
Combination with Pan-Tilt heads (3rd party)
Unified IP control protocol compatible with Panasonic PTZ camera systems
24.2M full-frame MOS sensor for emotional and cinematic video
(AW-UB50)
10.3M MOS sensor for capturing multiple subjects in a single frame
(AW-UB10)
Wide dynamic range with V-Log (AW-UB50: 14+ stops / AW-UB10: 13 stops)
Compact design (height, width & depth each less than 10cm, excluding lens)
Compatible with Media Production Suite for multi-camera setups with PTZ cameras
Planned support for IP transmission standards including NDI® HX2*, RTMPS, and SRT
Watch the video
Specifications
AW-UB50
AW-UB10
General
Power Requirements
When using Lithium-ion battery pack: 7.28 V
When using included AC adapter: 12 V/3 A
PoE
PoE+
IEEE802.3at compliant
Power Consumption
when recording
8.1 W (When the interchangeable lens S-R24105 is attached)
7.9 W (When the interchangeable lens H-ES12060 is attached)
Power Consumption
when playing back
6.9 W (When the interchangeable lens S-R24105 is attached)
6.7 W (When the interchangeable lens H-ES12060 is attached)
Operating Temperature
-10 °C to 40 °C (14 °F to 104 °F)
Operating Humidity
10 % to 80 %
Storage Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Storage Humidity
0 % to 90 %
Weight
Approx. 585 g / 1.29 lb (Body only)
Approx. 545 g / 1.2 lb (body only)
Dimensions
W 93.0 mm x 93.0 mm x 78.8 mm
(3.66 inches x 3.66 inches x 3.1 inches)
(excluding protrusions)
W 93.0 mm x 93.0 mm x 78.0 mm
(3.66 inches x 3.66 inches x 3.07 inches)
(excluding protrusions)
Waterproof and Dust Proof
—
—
Camera Unit
Imaging Sensor
35 mm full-size (35.6 mm x 23.8mm) MOS x 1
4/3″ MOS x 1
Effective Pixels
Approx. 24.2 megapixels
Approx. 10.3 megapixels
Latitude
V-Log: 14+ stops
V-Log L: 13 stops
Lens Mount
L-mount
Micro Four Thirds mount
Focus
Focus mode
AF / MF
Focus
AF mode
Motion picture: Auto Detection (Face, Eye, Body, Animal) / Tracking / 225-Area / Zone (Oval) / 1-Area
Still image: Auto Detection (Face, Eye, Body, Animal) / 225-Area /1-Area
(Tethered photo shooting with LUMIX Tether for Multicam software)
ISO Sensitivity (Standard Output Sensitivity)
AUTO / 100 to 51200 (When [Extended ISO] is set: AUTO / 50 to 204800)
AUTO / 0 dB to 54 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 66 dB)
* ISO sensitivity can be changed in 1/3EV steps
AUTO / 160 to 51200 (When [Extended ISO] is set: AUTO / 80 to 204800)
AUTO / 0 dB to 50 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 62 dB)
* ISO sensitivity can be changed in 1/3EV steps
Dual Native ISO
Normal
[AUTO] Base sensitivity: ISO100/640 (dB display values are based on ISO100)
AUTO / 100 to 51200 (When [Extended ISO] is set: AUTO / 50 to 204800)
AUTO / 0 dB to 54 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 66 dB)
[LOW] Base sensitivity: ISO100
AUTO / 100 to 800 (When [Extended ISO] is set: AUTO / 50 to 800)
AUTO / 0 dB to 18 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 18 dB)
[HIGH] Base sensitivity: ISO640
AUTO / 640 to 51200 (When [Extended ISO] is set: AUTO / 320 to 204800)
AUTO / 0 dB to 38 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 50 dB)
[AUTO] Base sensitivity: ISO160/800 (dB display values are based on ISO160)
AUTO / 160 to 51200 (When [Extended ISO] is set: AUTO / 80 to 204800)
AUTO / 0 dB to 50 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 62 dB)
[LOW] Base sensitivity: ISO160
AUTO / 160 to 800 (When [Extended ISO] is set: AUTO / 80 to 800)
AUTO / 0 dB to 14 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 14 dB)
[HIGH] Base sensitivity: ISO800
AUTO / 800 to 51200 (When [Extended ISO] is set: AUTO / 800 to 204800)
AUTO / 0 dB to 36 dB (When [Extended Gain Setting] is set: AUTO / 0 dB to 48 dB)
PTZ Camera
(AW-UE160)
[AUTO] Base sensitivity: ISO250/1600 (dB display values are based on ISO250)
AUTO / 250 to 51200 (When [Extended ISO] is set:
AUTO / 125 to 204800)
AUTO / 0 dB to 46 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 58 dB)
[LOW] Base sensitivity: ISO250
AUTO / 250 to 2000 (When [Extended ISO] is set:
AUTO / 125 to 2000)
AUTO / 0 dB to 18 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 42 dB)
[HIGH] Base sensitivity: ISO1600
AUTO / 1600 to 51200 (When [Extended ISO] is set:
AUTO / 800 to 204800)
AUTO / 0 dB to 30 dB (When [Extended Gain Setting] isset: AUTO / -6 dB to 42 dB)
[AUTO] Base sensitivity: ISO320/1600 (dB display values are based on ISO320)
AUTO / 320 to 51200 (When [Extended ISO] is set: AUTO / 160 to 204800)
AUTO / 0 dB to 44 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 56 dB)
[LOW] Base sensitivity: ISO320
AUTO / 320 to 1600 (When [Extended ISO] is set: AUTO / 160 to 1600)
AUTO / 0 dB to 14 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 14 dB)
[HIGH] Base sensitivity: ISO1600
AUTO / 1600 to 51200 (When [Extended ISO] is set: AUTO / 1600 to 204800)
AUTO / 0 dB to 30 dB (When [Extended Gain Setting] is set: AUTO / 0 dB to 42 dB)
V-Log
[AUTO] Base sensitivity: ISO640/4000 (dB display values are based on ISO640)
AUTO / 640 to 51200 (When [Extended ISO] is set: AUTO / 320 to 51200)
AUTO / 0 dB to 38 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 38 dB)
[LOW] Base sensitivity: ISO640
AUTO / 640 to 5000 (When [Extended ISO] is set: AUTO / 320 to 5000)
AUTO / 0 dB to 18 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 18 dB)
[HIGH] Base sensitivity: ISO4000
AUTO / 4000 to 51200 (When [Extended ISO] is set: AUTO / 2000 to 51200)
AUTO / 0 dB to 22 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 22 dB)
[AUTO] Base sensitivity: ISO400/2000 (dB display values are based on ISO400)
AUTO / 400 to 25600
AUTO / 0 dB to 36 dB
[LOW] Base sensitivity: ISO400
AUTO / 400 to 2000
AUTO / 0 dB to 14 dB
[HIGH] Base sensitivity: ISO2000
AUTO / 2000 to 25600
AUTO / 0 dB to 22 dB
HLG (Hybrid Log Gamma)
[AUTO] Base sensitivity: ISO400/2500 (dB display values are based on ISO400)
AUTO / 400 to 51200 (When [Extended ISO] is set: AUTO / 400 to 204800)
AUTO / 0 dB to 42 dB (When [Extended Gain Setting] is set: AUTO / 0 dB to 54 dB)
[LOW] Base sensitivity: ISO400
AUTO / 400 to 3200
AUTO / 0 dB to 18 dB
[HIGH] Base sensitivity: ISO2500
AUTO / 2500 to 51200 (When [Extended ISO] is set: AUTO / 2500 to 204800)
AUTO / 0 dB to 26 dB (When [Extended Gain Setting] is set: AUTO / 0 dB to 38 dB)
[AUTO] Base sensitivity: ISO320/1600 (dB display values are based on ISO320)
AUTO / 320 to 51200 (When [Extended ISO] is set: AUTO / 320 to 204800)
AUTO / 0 dB to 44 dB (When [Extended Gain Setting] is set: AUTO / 0 dB to 56 dB)
[LOW] Base sensitivity: ISO320
AUTO / 320 to 1600
AUTO / 0 dB to 14 dB
[HIGH] Base sensitivity: ISO1600
AUTO / 1600 to 51200 (When [Extended ISO] is set: AUTO / 1600 to 204800)
AUTO / 0 dB to 30 dB (When [Extended Gain Setting] is set: AUTO / 0 dB to 42 dB)
Cinelike D2/V2
[AUTO] Base sensitivity: ISO200/1250 (dB display values are based on ISO200)
AUTO / 200 to 51200 (When [Extended ISO] is set: AUTO / 100 to 204800)
AUTO / 0 dB to 48 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 60 dB)
[LOW] Base sensitivity: ISO200
AUTO / 200 to 1600 (When [Extended ISO] is set: AUTO / 100 to 1600)
AUTO / 0 dB to 18 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 18 dB)
[HIGH] Base sensitivity: ISO1250
AUTO / 1250 to 51200 (When [Extended ISO] is set: AUTO / 640 to 204800)
AUTO / 0 dB to 32 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 44 dB)
[AUTO] Base sensitivity: ISO160/800 (dB display values are based on ISO160)
AUTO / 160 to 51200 (When [Extended ISO] is set: AUTO / 80 to 204800)
AUTO / 0 dB to 50 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 62 dB)
[LOW] Base sensitivity: ISO160
AUTO / 160 to 800 (When [Extended ISO] is set: AUTO / 80 to 800)
AUTO / 0 dB to 14 dB (When [Extended Gain Setting] is set: AUTO / -6 dB to 14 dB)
[HIGH] Base sensitivity: ISO800
AUTO / 800 to 51200 (When [Extended ISO] is set: AUTO / 800 to 204800)
AUTO / 0 dB to 36 dB (When [Extended Gain Setting] is set: AUTO / 0 dB to 48 dB)
Creative Video Mode
[Custom Mode C1] to [Custom Mode C12]
[Custom Mode C1] to [Custom Mode C12]
Exposure Compensation
Motion picture: 1/3 EV step ±3 EV
Still image: 1/3 EV step ±5 EV
* Tethered photo shooting with LUMIX Tether for Multicam software.
Motion picture: 1/3 EV step ±3 EV
Still image: 1/3 EV step ±5 EV
* Tethered photo shooting with LUMIX Tether for Multicam software.
The AW-UB50 is equipped with a 24.2-megapixel effective full-size MOS sensor, while the AW-UB10 features a 10.3-megapixel effective 4/3-inch MOS sensor. Both achieve high sensitivity by optimizing dynamic range and signal-to-noise ratio for exceptional resolution, tonal gradation, color reproduction, and low noise.
AW-UB50’s sensor
Two Models Available
The AW-UB50 and AW-UB10 come with different sensor sizes so users can choose which one best suits their artistic expression as well as the location scale.
Log Shooting
Both models offer V-Log shooting for wide dynamic range, enabling rich tones and flexible grading with excellent highlight tolerance for fine, rich tonal gradations of dark and highlight areas (AW-UB50: 14+ stops / AW-UB10: 13 stops). In addition, when editing video from the AW-UE160W/K 4K integrated camera, V-Log helps to ensure a consistent look for highly efficient editing.
What is Log?
It has a wide color gamut and wide dynamic range, and records all brightness as evenly as possible, resulting in a low-contrast image in appearance.
The color grading tool allows a high degree of freedom in image creation using 3D LUTs and CDLs.
V-Log is a log curve developed for the VariCam cinema cameras based on our image creation philosophy and is used in many of our cameras.
Both models come with Dual Native ISO for high-sensitivity video even in low-light environments, allowing shooting with compact lighting equipment or natural light without significantly compromising video quality. This also reduces the need for extensive post-production work, such as noise reduction. In ISO Auto mode, ISO sensitivity is displayed in real time to visualize noise levels while shooting.
Efficient Video Creation
Color profiles compatible with the AW-UE160W/K 4K integrated camera enable color matching when using multiple PTZ cameras.
Versatile Interchangeable Lens
The AW-UB50/10 each have dedicated interchangeable lenses. In addition to the high optical performance developed through LUMIX, they deliver excellent image quality. They cater to a wide range of needs, such as capturing dramatic expression changes or zooming in on decisive scenes.
Note: When using the electric zoom lenses (H-PS14042, H-PS45175), lens-specific shake may occur at the wide and telephoto ends.
The AW-UB50/10 flexibly adapts to diverse scenarios thanks to standard connections for professional equipment, including 3G-SDI OUT, TC IN/OUT, GENLOCK IN, HDMI Type A, LAN, USB Type-C, φ3.5 MIC, and headphones. LAN is PoE+ compliant for power supply, allowing video transmission, control, and power supply over a single LAN cable, significantly reducing wiring complexity in the field.
Two SD Card Slots
The two built-in SD card slots support data management with the best recording method, either sequential (relay) recording or backup recording, depending on the shooting environment and conditions.
Multiple IP Transmission Standards
Both models are compatible with the NDI® HX2* IP standard for sharing high-definition video data with networked equipment, making it easy to build IP-based systems incorporating other NDI-compatible devices.
* NDI® is a video connectivity technology and is registered as a trademark by Vizrt NDI AB in the United States and other countries.
Expand shooting situations according to the combinations you choose
Supports a common IP control protocol for seamless integration with Panasonic PTZ cameras, allowing operation from the remote operation panel (ROP).
In the future, it will support a wide variety of scenarios by linking with remote camera controllers and live switchers.
System with Panasonic PTZ cameras and other professional equipment (example)
The system can be controlled centrally with the Panasonic remote operation panel (ROP).
It allows unified operation of parameters such as focus and exposure. This not only streamlines operation but also significantly reduces system setup time and management workload.
Application examples such as a box-style camera + PTZ Camera
We would like to introduce various application scenarios that can be expanded through the combination of remote cameras and other Panasonic cameras.
* The image below is for illustrative purposes only.
e-Sports (AW-UB10 + PTZ camera)
The video captures the players’ facial expressions and creates a sense of realism by conveying the tension during the match and the atmosphere of the venue.
Supports a wide range of shooting styles with flexible expandability
The minimal boby, designed specifically for video production, features a wide variety of I/O interfaces, making the camera versatile for diverse applications including multi-camera setups, streaming, and traditional production styles using tripods and gimbals.
* The image is for illustrative purposes only.
Application examples for box-style cameras + accessories
From production sites that require advanced operations such as multi-camera and live streaming, to one-man gimbal/handheld shooting utilizing its mobility, cinema video production that emphasizes scalability and balance, and wireless-controlled shooting with drones, the system can handle a wide variety of professional shooting environments.
* The image below is for illustrative purposes only.
• Four Thirds™, Micro Four Thirds™, and the Four Thirds and Micro Four Thirds logo marks are trademarks or registered trademarks of Olympus Corporation in Japan, the United States, the EU, and other countries.
• HDMI, High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
* Images are simulated.
* External equipments may not be available in certain regions.
* We do not guarantee operational compatibility with all third-party commercial devices.
The Media Production Suite* software platform can be used to create multi-camera systems that include PTZ cameras. It can automatically detect and list of all Panasonic PTZ cameras connected to the same network as the PC. It can also be used to check camera information (IP address, version number, etc.) and to configure camera network settings, enhancing the efficiency of multi-PTZ camera operations.
* Compatible with EasyIP mode in the suite’s Device Manager feature. Future firmware updates will extend this feature to other devices.
Media Production Suite (Easy IP mode)
System with PTZ cameras using Media Production Suite (example)
LUMIX Tether
Software for batch start/stop, etc. in system with AW-UB10 or AW-UB50 only
This is a software tool that makes it easy to set up the network functions of P2 equipment.
It can encrypt setting data (password, etc.) and create setting files on SD memory cards.
All that is required for setting up is to load this SD card onto P2 equipment.
* AW-UB10 only. Support for AW-UB50 is planned for the future.
Reviews
There are no reviews yet.